• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Window Sash Repairs

Window sashes need to be checked regularly for mold, mildew, and damage. If you catch these issues early you can save money on future repairs.

The sash is the internal frame that is vertically moved either up or down in windows that open. This article will demonstrate how to perform several simple repairs to sash.

Weather Stripping

Wooden window sashes can add an elegant appearance to your home. They are also sturdy and can last many years provided they are properly maintained. However, they can be damaged or degraded over time, due to exposure and normal wear. However, sash repair experts can restore your windows back to their original condition and keep them looking fantastic for longer than replacement windows.

Weather stripping is the primary issue to take care of when fixing windows with sash. It's located on both the frame and sash. It can cause drafts if it's damaged or is loose. Start by identifying the brand of window and the date of manufacture for the glass (etched on the glass's corner or on the aluminum spacers between panes). Then, take the sash off and mark its width and height, so you can find the appropriate weather stripping replacement to match.

Next, remove the sash and set it on a surface so you can access all four sides. If your sash is double-hung, you'll also need to take off the weights and their accompanying ropes, which should have fallen into the pocket of the jamb liner. Once you've removed the sash and the weights, use a utility knife to cut away the weather stripping from the corners, and then remove it manually or using a putty knife.

After the sash has been cleared it is time to replace the parting stops. These are long pieces that split the sashes. Pam prefers standard 1/2-inch by 3/4-inch window trimming from the lumberyard. However, you can substitute a scrap piece of wood.

After removing the stoppers for parting and trimming them to the desired length and thickness, apply a thin layer of glazing compound on the bottom of the sash. Smooth it out using your putty knife and let it dry for a minimum of a day. When it's completely dried then apply a top coat of acrylic latex paint. This will protect the putty, and give your sash a fresh look.

Sash Hardware

The hardware that supports the window sashes may wear out with time and use. This can result in a door or a upvc window repairs that is difficult to open or close. It's good to know that replacing or repairing this hardware is often simple and inexpensive. If a sash is difficult to operate try spraying grease into the jamb channel and then slide it open to see if it fixes the problem. If the issue continues it's likely to be due to the sash's balance. You will need to remove the window sash in order to reach this hardware.

Sashes for windows should be able to be able to open and close with minimal effort. However, this can be difficult if the weights are worn out or the sash-to rail connecting rail isn't properly glazed. This issue could be caused by various reasons that include a lack of maintenance and a mismatched weight rating.

If the hinges on windows begin to slide, this can cause the sash drag, and then eventually to hit the frame at the opposite corner (Photo 1). To fix this problem, first ensure that the sash fits squarely in the opening of the frame and then remove it from the window. If the sash is secured to the hinge arm, you'll have to remove the hinge arm and replace it (Photo 2). Then, you can install the new sash (Photo 3).

Old windows, particularly those in older homes, may be difficult to open and close because of sagging hinges and general inefficiency. Many times it is a matter of making a few minor adjustments that can make these windows operate smoothly again and save homeowners money on energy bills.

It is essential to have the tools you require before you begin. Mark the hinge channel's location on the frame (Photo 1) using a pencil. This will assist you in getting the channel back in place correctly when you're finished. Then, remove the sash, and then remove the hardware, including the parting beads (Photo 2) and the cords or chains that secure it. Soften any putty that has been hardened with an electric heat gun set to medium and fitted with an shield to block the nozzle. Remove the old sash, and put it in a labelled bag.

Sash Weights

Sash weights can be changed to enhance the efficiency of your window sash, and also reduce the cost of energy. Sash weights are hefty lead or iron cylinders, which are enclosed inside a hidden compartment and linked to the moveable upvc window repairs near me sash using rope. These weights act as counterbalances, allowing you to open and shut the window without the need for mechanical or electrical devices. The sash weights are often ignored or discarded by homeowners and then turned into scrap when they fail. Consequently, you may need to search for replacements.

A sash weight that has fallen out of the cavity is difficult to get back and you'll need to find a replacement that is suitable for the. You will also require a new piece of string, a length sashcord and a few sashpulleys for tying the weights you are replacing to the cord.

Older wood windows are joined using mortise and tenon joints. Pin punch and hammer can be used to remove the wood pegs holding the components together. The majority of these pegs are big on one side, and smaller on the other. It is essential to remove first the smaller diameter sides. Sashes made later in the century utilized glue instead of pegs. They can be separated by cutting the glue line using an instrument, and then tapping the mortised section loose using a mallet.

After the sash is removed, you can take off the sash stops and gain access to the weight pockets. This is usually done via an opening at the bottom of every jamb. This hole is covered by an access panel of wood that can be cut off to let you see the inner workings of the frame.

When the sash has been shut off and the access panel is removed, you can take off the weight that was previously installed and replace it. Weigh the sash first to ensure that the weights you have might not be of the right size. After the new weight is in place, tie a string to it and thread it through the pulley of the sash. Then attach the string to the frame, leaving a few inches of string sticking out from the head for future adjustments.

Sash Cords

In most old double-hung upvc window repairs the chain or cord is attached to the weights. This helps keep the sashes of the jamb balanced. Over time these cords can break, making it difficult to raise the window. A new sash cable can restore the ability to move and lower the sash and keep it in position when opened.

To replace sash cords the first step is to remove the access panels from the jambs. They are usually attached by nails or screws and require removal. It may be possible to take them out using the hammer or chisel however, it is best to lay out dust sheets prior to beginning any work.

After you have removed the access panel, you are able to begin working on the sash. Utilize a flat bar or chisel, to pry the narrow parting beads from their grooves. They are usually wedged in or nailed, but they can be removed which is why it's worth your time. If the sash is in place, remove the mortise and the tenon joints by using the help of a hammer and pin or screwdriver, then unhook the wood pegs on each piece. The sash should be able move around freely now, however it may require some lubrication to make it feel less stiff.

Take a measurement of the length of sash cord/chain needed to reach the sash slot at the bottom of the pulley at the top of the jamb. Cut the cord or chain and secure it as in the previous step. You can either use a hammer and screws or nails, however nails are less likely to cause damage.

Unless you've bought a kit that replaces the old counterbalance system, it's best to keep the original weights for balancing in place. They're not expensive and easy to install if purchased them from architectural salvage stores. Based on the dimensions and shape of your window, you may require one or two sashweights in order to keep the sash open.