• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Do a Door Lock Change

Changing your door lock is a simple and inexpensive way to increase the security of your home. The process is not for everyone. It requires some skill and patience.

The cylinder is contained within the knob body. The cylinder is responsible for recognizing the key when it is inserted into the lock.

Removal of the old lock

First, you must remove the lock you have been using for a while. It's a relatively easy process, but you should keep certain things in your mind. Make sure the new lock is compatible with your door. This will ensure that it fits properly and doesn't leave a gap in the latch or deadbolt plug.

Once you have removed the latch plate look for two bolts or screws on the inside of the casing that hold the casing and the halves of the lock together. Remove these screws using a screwdriver and then pull the lock out of the door. If you have a mortise lock there might be a set screw at the base of the handle that holds it to the spindle. Use a screwdriver to unscrew the screw, and then take out the doorknobs.

You should also remove the latch and deadbolt plug from the hole in the door jamb. Then, you can put in your new lock. If you're replacing a mortise you must measure the distance between your lock's case and your door's edge to make sure that your new lock fits.

You may want to replace window Lock your lock for various reasons, for instance, the possibility that someone else holds the key or you've got a new roommate. You could save money if you remove the lock yourself instead of hiring for a professional. The process is simpler than many people think, and it can be done in a few minutes.

Remove the handle and trim of your door. Then, you can pry the trim away using a screwdriver that is flat. You will be able to pull off most of it, and in some cases the handles could come off completely. Next, look for a pinhole on the inside of the handle, and insert a straightened clip into it. This will trigger the release mechanism, which allows you to take off the handle. Then, look for another small tab on the interior of the double glazed window lock repair and press it with a flat screwdriver. After the spindle has been removed, you can remove the housing and the cylinder.

The process of selecting a new lock

There are many options to choose from when it comes time to pick the right lock. Take a look at the various types of locks and pick one that is in keeping with the style of your door. Consider the backset (the distance between the door's edge and the center of the hole for the lock) and the cross bore (small hole that runs along the edge of the door frame). Also, ensure that you select a lock that is able to fit the door thickness and swing.

Most door locks are evaluated by BHMA and the American National Standards Institute to give you an idea of how well they stand up to use and how difficult they are to pick or disable. A grade 3 lock may be perfect for a quiet apartment complex in the countryside, whereas double glazing window locks repairs that are grade 1 might be better suited to an area with a lot of traffic, such as a storefront.

Most smart door locks require digital code to open. If you are concerned about hacking or other security concerns, consult a professional locksmith.

Replacing the cylinder

If your door lock cylinder is broken or damaged, you can replace window locks it in a matter of minutes using a simple DIY project. The key is to select the right cylinder, and follow the directions that accompany it. First, remove the knob or handle if it is present. Then, using a screwdriver, take off the trim around the lock cylinder. Once the trim has been removed, it is possible to remove the screws holding the cylinder in place using the flathead. The cylinder can then be gently removed from the door.

Before you install the new cylinder, be sure that it is the right length for the door you are using. With a tape measure, determine the distance between the cylinder's center and the left and right sides. Purchase a new cylinder that has the same measurements. This will prevent cylinders from snapping when doors are kicked or the key gets stuck inside.

If you have a suitable upvc window replacement lock cylinder, put it in the door and turn the key. This will align the cylinder with your carrier which is located usually on the outside of your lock. Then, loosen the set screw, which should be just a few turns inside the head. You will also need to loosen the screw in the door's edge that holds the case in place, in the event that there is one.

After you have removed the lock cylinder, you can replace it with a new lock by sliding the new cylinder into the case and tightening the set screw. You should also reinstall the bracket that connects the cylinder to the stem for the lock indicator and this can be done by removing three small tabs on back of the cylinder with needle-nose pliers. Then, you'll be able to attach the remaining smaller bracket to the back of the cylinder. Then, you should install the strike plate and latch plate, as well as the retaining ring that is attached to the top of the window lock repairs cylinder.

Installing the new lock

Start by measuring the door's width if you are replacing an existing lock. The majority of residential locksets are designed for doors with a thickness of 1 3/8 to 3/4 inch. If your door is more thick, you will need an extra-thick door kit that includes longer screws, longer tail pieces (for door knobs) or spindle extension (for deadbolts).

Most locks come with detailed instruction manual to guide you through the installation of the new hardware. Before you begin, read the instructions to ensure you've followed the steps. The manual will give you a clear idea of how much skill is required to finish the task. If you're changing a lock for the first time, you may consider asking a more experienced person for help.

Before installing the new lock it is an excellent idea to put cover the holes with tape the old hardware. This will prevent the screws from slipping through the holes and will also protect any tiles you have installed. This will also protect your tiles from any damage caused by dirt, rust and grime. SECURAM Touch comes with a strip painter's tape, which is designed to be used for this purpose, however you can also use gaffer's tape or masking tape when you have it.

Once you've removed the screws that hold the interior portion of the lock section to the outside side immediately, pull it back. This should be done swiftly to avoid the lock from accidentally closing and harming the mechanism.

If the new lock comes with an internal latch bolt, insert the new latch bolt into the upper cross bore. Make sure to place it in the proper location, which is marked by an arrow. Then, you can screw the latch plate onto the bolt.

Finally, screw in the deadbolt and strike plates to the door jamb. Test the deadbolt by throwing it few times to ensure that it extends all way through the strike plate and is secure. If you're using an electronic smart lock, be sure to follow the instructions to program it. This involves downloading an application and entering your email address, confirming your identity, and then connecting to the wireless network to add your device.